View Full Version : Problems using Wedoit 3.0
i cant get to play a match using the wedoit 3.0 patch... it works fine untill the point where it loads up the match... then it just freezes... the music keeps going but nothing happens..
i tested it using wedoit patch 1.0, and the dynamo on it.. it worked like a charm, but i wanted to try wedoit 3.0....
i patched WE6FE_wedoit3 onto the original clean image.. applied the ita2eng patch, and burned it at the slowest speed possible... Did i do something wrong?? has anyone else had this prob?? and how do i solve it??
ill apriciate any help i can get!
Thanks in advance!
Are you using the second version of the ita2eng patch?
If not, get it.
I had a problem with the first one I burnt with wedoit 3.
It froze in the intro menu screen.
I tried it again and it worked fine.
ok, ill try that... i used the first ita2eng patch that came with wedoit 3.0, so i guess thats my prob...
Let us know how it goes.
hmmm... its still not working :(
I did as you said zygalski.. i d/l the ita2eng- fix patch and applied both the new wedoit 3.0 patch and the new ita2eng fix... it still freezes at the exact same spot it did before... just as it loads up the match screen..
can i apply 2 wedoit patches at once? cause if so, i thought about patching wedoit 3, and then wedoit 1, to fix the translation that way... cause i think the translation is my problem... is there any other translation-patches out there??
Thanks in advance!
Don't think so.
I don't think usint two wedoits will work.
Maybe Mike or Tim can help out here.
If you can spare the disk, maybe try the wedoit3 on its own to see if that works. If not, maybe your file is bad and you need to
get another version.
Maybe also check the basics like make sure nothing else is running while you burn.
Firstly, why do you want WEdoIT 3.0??? Its rubbish, get dynamo.
If you still insist on getting it, what i did was
1. clean img of we6fe
2. patch with we doit3.0
3. patch with ita2eng patch
4. patch half time fix
5. burn with nero at 2x
Sound advice from zygalski about checking that your file isn't corrupt.
Tim, I thought that 4 was an improved/updated version of 3?
So you would only need 4?
I only used 4 anyway and it worked fine.
Plus wedoit 3 ain't that bad.
Ad boards are much better.
As is the music. And the badges are nicer.
Only bad point is the chants and some team rosters.
4 what? there is no wedoit4?
wedoit3.0 - you like the music??? omg...... the adboards are good, which is why i have put them on my dynamo.
its just personal opinion as to what patch people have isnt it!
ok so i went ahead and took ur advice... i patched wedoit 3.0... by itself, without any ita2eng-patch onto a clean image... and the same thing happend... :(
at least now, i know that its my wedoit 3.0 thats the prob... i dont get it though, cause yesterday when i first ran into the problem, i downloaded the ita2eng fix, which included a new wedoit 3.0... the one i just tried...
i guess ill just redownload and start over :(
Thanks for all ur help guys
Tim, I meant step 4 in your list.
("4. patch half time fix")
And the music in wedoit3 is a lot better than Dynamo which just goes quiet after a while.
STC, good luck with the next version.
Thanks! looks like ill need it ::(
whats a sure sign of using the dynamo patch?? i applied it a few days ago along with wedoit 1, just to see if i could get anything to work at all.. :) it worked fine, but come to think of it didnt see any of the things that ive heard dynamo would do...
what is the right way to do it if i wanted to use the dynamo patch?
sorry for all these n00b question guys... im workin on it :)
Thanks in advance!
I used Mike's site here (http://www.freewebs.com/dt11/patchmain.htm) and it was very helpful and simple to understand.
You should be able to tell which Patch you have used by the menu screens and music. Dynamo plays a lot of Queen throughout. Menus can be seen at the site I think.
It has a Milan main menu pic.
ok, trying it now!
Do i need to apply wedoit 1 along with dynamo? for translation-reasons right?? or will i be ok using only the dynamo?
Yep Dynamo requires the wedoit 1.0 base, for translation.
so.. i patch wedoit 1 and then dynamo right??
just wanna be sure!
I did it like that.
then Solidus 4
Although the Solidus fix should be in there somewhere.
Not sure what it does though. Any ideas anyone?
Yep you apply all ppf then any afp patches. That order is fine, the fix would just be applied after solidus 4 but you must regenerate and reload afsexplorer.
but what does it fix?
Fixes what most consider minor bugs, sometimes chants loop or go really quiet.
How come the makers don't fix the patches and call them version 1.2 etc instead of giving fixes for them?
Probably because they spend a fair bit of time uploading, then to change the existing patch when only minor changes are actually needed would be a waste. And they would have to upload the whole thing again.
Mike, why are you hiding?
The millions of daily attacks I get via pm, e-mail and messenger ;)
The price of fame....
lol, I might change my name and move to Japan :D
Or you go to Yemen.
Or Kazakhstan. Yakshimasch!
lol. does the fix also activate the arsenal chants? because without it PSV Eindhoven have the arsenal chants!!!
I think Mike just left...
(followed by rampaging teenage girls!)
I don't know the answer.
The PSV chants were replaced with the Arsenal ones I think, and Bayern ones replaced Chievo.
ok, so i applied the dynamo patch, and its actually workin! lol thanks for all ur help guys... i really appriciate it..
one final question...
what would i do if i wanted to use the adboards from wedoit 3 in with my dynamo-patch??
once again.... thanks for all ur help guys!
You would have to extract the right files from and replace them...better get reading them tutorials ;)
hehe i think ill stick with my dynamo-patch as it is for now....
Is there any way to put the chants from the others into wedoit3?
With the size of them you might have to sacrifice some parts. Problem is something to do with a given amount of chant files, so you normally sacrifice one for another.
i just put the adboards from wedoit 3.0 into my dynamo, i also changed the training menu music to vindaloo, and changed the title screen to a little nike number. im now gonna try and swap real madrid goalie kit, because casilas wears the yellow top when they're at home, not blue! Is there any site where i can download WE6FE kits??? Ive seen plenty of fifa sites for kits etc.
O yeah, i want to change the CL ball back to the Fevernova would i...
extract the fevernova ball from the tex_pl.bin of unedited we6fe, then insert it into dynamo patched we6fe??? is the only thing you have to change for the ball in the tex_pl.bin???
vBulletin® v3.8.2, Copyright ©2000-2013, Jelsoft Enterprises Ltd.