Lawn Care Service of Cedar Park 100 E Whitestone Blvd Ste 148, #166 Cedar Park, TX 78613 (512) 595-0884
JOHN and ICE, all i can say is that the xploder one and the xport one definatley work. the only problem seems to be with the datel (z36 etc...) one. what about an xploder off of ebay? http://cgi.ebay.co.uk/NEW-UK-XBOX-3...yZ112846QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Also I could email a picture of my xport window in action if that would help you see the files etc...
(PS. are you definatley downloading the .bin files and unzipping themfirst?)
i have the xploder cheats save but using xport rather than that as you can use the drag and drop method. if u could send me a picture of your xport window and xbox interface when you transfer you data to your xbox hdd that you be great.
yes definatley unzipping the .bin files using winrar
hi aldothenoo, just answered your question on the "SUCCESS..." thread. There is basic instructions left there 4 u. The answer is 'no' to needing a memory card if you already have the xport that connects directly to your hard drive. ( we are just downloading the xport software cause it works with cards too)memory card for xport .do u need one?
ice, got the PM, will email it 2 u now, then i'm of 2 bed. Ta
JOHN and ICE, all i can say is that the xploder one and the xport one definatley work. the only problem seems to be with the datel (z36 etc...) one. what about an xploder off of ebay? http://cgi.ebay.co.uk/NEW-UK-XBOX-3...yZ112846QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Also I could email a picture of my xport window in action if that would help you see the files etc...
(PS. are you definatley downloading the .bin files and unzipping themfirst?)
i have got it to work!!!!! The problem is that you need to download a driver for 512Mb Memory cards when using xport to transfer the data.
see below:
1. Click Start, then "run".
2. Enter "devmgmt.msc" in the run edit box and click OK.
3. In device manager, open the "Universal Serial Bus controllers" tree.
4. You will see at least two devices called "USB Mass Storage Device".
5. Right click the first "USB Mass Storage Device" and select "update driver".
6. In the hardware update wizard, select "No, not this time", click next.
7. Select "Install from a specific location", click next.
8. Select "Don’t search, I will select the driver to install, click next.
9. In the driver selection box, click the "Have Disk" button.
10. Locate the "XPort 360.inf" file, usually found in "C:\Program Files\Datel\XPort 360".
11. The driver "X360 MU USBIO" should now be selected, click next.
12. Click "finish".
Hope this helps
Ice your a legend. I have a 512mb card and was having the same issues. Even the support team couldnt help me. Maybe you should go work for them . . .