For the best lawn care in cedar park, please visit our sponsor at lawn service cedar park They are a local lawn care and landscaping company that provide services in such as lawn care, lawn mowing, weeding, and landscape maintenance in Cedar Park, Austin, Round Rock, and Leander area. They are located at:

Lawn Care Service of Cedar Park 100 E Whitestone Blvd Ste 148, #166 Cedar Park, TX 78613 (512) 595-0884

DAYMOS & MACHEDA ELITE v2 NPOWER PES/WE 2011 XBOX 360 OF

Grenade

Registered User
I successfully got the full contents of the option file onto my system, without much difficulty.

First thing I did was to delete all previous edit data, uniform/strip data and emblem data files from my xbox hard drive. I think it's better to start fresh. Make sure you don't delete other files off your xbox that you need such as your system data file, formations, replays and saved leagues or cups.

When I copied the files from Daymos' option file over to my USB and put it into my Xbox, there were quite a few files missing. I might be wrong but I think that you can only transfer 256 files in one go. This option file has 347* files so I couldn't do it all in one go. I first chose 200 files to copy over, then copied the remaining 147. Easy as that. Switch the game on and it works fine. No problems.

I did encounter a minor problem in that when I copied over my files using the latest version of USB XTAF GUI, when I put the USB into the Xbox it would say 'unformatted drive', so I reformatted the drive and then used the older version of USB XTAF GUI to transfer the files over. I find the latest version a bit temperamental and don't trust it although it is a bit easier to use.

* I say 347- Daymos it's actually 349! You left a league and also a goal replay in the folder! :D
 

boothy9

Registered User
I've got a quick question.

I've got the option file successfully onto my xbox 360 (great work Daymos) and I'm wanting to help out my mate who has just bought pro evo 11 for his xbox 360 arcade with no hdd.

He does have an external hard drive so if I took my Xbox hard drive to his house plugged it in at the same time as his external hard drive is in, could I copy over all my Pro Evo 11 data to his external hard drive and then he could use the edited data from this?

Cheers in advance for any answers! I know its likely to not be possible. I've told the cheapskate to get a Xbox 360 HDD on more than one occassion!
 

Daymos

Registered User
No one encountered the same weird thing as I wrote about around 10 pages back? Stuttgart and Watford swapped places/leagues with eachother, and ALL the player names of the nPower league + Stuttgart and Wolfsburg teams all of a sudden had the default ugly player names (fixed problem by loading edit data again)..?

Dare I create a team of my own soon including all my buddies or should I expect coming file updates to wipe my edit data every time?

If your playing existing master leagues or general leagues started before v2 then things may mess up because of the large number of teams/ players created.

Start competitions again if you get a new OF with big changes.. Or with a master league it's self explainatory really because you have to add the npower teams in :)


Regarding the other forum which should have been called, Daymos you missed bit .lol
Perhaps someone wants to help put these in v3 before its frozen in a week..

When I say frozen,I mean after it's frozen v3 work begins and the party involved all work from the same for v3
 

russyanderson

Registered User
No one encountered the same weird thing as I wrote about around 10 pages back? Stuttgart and Watford swapped places/leagues with eachother, and ALL the player names of the nPower league + Stuttgart and Wolfsburg teams all of a sudden had the default ugly player names (fixed problem by loading edit data again)..?

Dare I create a team of my own soon including all my buddies or should I expect coming file updates to wipe my edit data every time?

yeah mine too, watford and stuttgart sawp,
 

PlayerOfPes

Registered User
I wanted to give it another shot so i deleted the option file from harddrive like people in here said. I have my system data and the two dlc from konami.

I need help with what do to from here
first I will tranfers all the files from the first option file daymos released put in my usb then copy it to my 360. than i tranfers the kit fix option file on my usb and copy it over my 360 and it should work?

correct?
 

LooKaZ

Registered User
There are some files there dosen't work on the new downloading. I transfer it, but the files don't show up in the Xbox Memory :( I split the transfer for 3. The files 238, 239, 243, 246, 247, 248, 249, 250, 253, 254, 255, 287 and 288 dont works :( And the file 287 + 288 is totally missing in both of you're uploads daymos :(

Daymos, are you sure about these missing files ??
Because (after transfer them by USB XTAF) in X360 they showed up as duplicate files (112, 113, 115 - 117, 121, 130, 182, 184 - 186). I think it`s a bit wierd, but maybe I am wrong. I just want to be sure everything is ok and I can start my ML with those great kits and emblems you made ;)

USE "USB XTAF GUI VERSION 32 beta2" not beta3 !!!
(cause the latest version has "unformatted drive" issue)
 

Steve Justice

Registered User
I wanted to give it another shot so i deleted the option file from harddrive like people in here said. I have my system data and the two dlc from konami.

I need help with what do to from here
first I will tranfers all the files from the first option file daymos released put in my usb then copy it to my 360. than i tranfers the kit fix option file on my usb and copy it over my 360 and it should work?

correct?

1. Make sure you have downloaded the latest patch first and foremost.
2. Copy all files from harddrive to memory stick.
3. Put memory stick into PC. Open up the file extractor software.
4. When you go into the 0000000001 folder, extract the option file and add it into Damos folder also marked 000000001.
5. Open up the extractor program again and when you get to the 000000001 folder, delete it.
6. Now select inject folder and add in Damos 000000001 folder.
7. Pop the memory stick back into your Xbox and copy files over.

I think the extractor software only allows you to insert so many files and if yours is like mine then it only goes up to uniform196. 197-293 have not been copied which is why some of the data is missing. So this is what you do.

8. Insert memory stick into PC again. Open up Damos 00000001 folder and delete uniform files 001-196 (obviously best to do it this way as you can select all files at once, where as in the extractor software you have to do it one at a time).
9. Now open up extractor software and follow the steps to delete the 00000001 folder and inject Damos folder again (now minus files 001-196).
10. Pop your memory stick back into your Xbox, copy files (overwrite existing files as these contain all the same data) which will now add uniform files 197-293.
 

PlayerOfPes

Registered User
I dont have any files on my harddrive to copy into the usb so 1-5 ssems pretty pointless.

theres gotta be an easier way mate the first option file he released took five minutes to install.
 

wolf_cesar

Registered User
Any chance of a brief list of what will be added to V3? No point in me starting a ML if I want to download V3.

There will be different v3 versions...

Confirmed:

v3 Portuguese League
v3 Scottish League
v3 Bundesliga

But, it will take a bit to get all done, so I would say you can start a ML until the v3 you're interested gets out.
 

pes09addict

Registered User
If your playing existing master leagues or general leagues started before v2 then things may mess up because of the large number of teams/ players created.

Start competitions again if you get a new OF with big changes.. Or with a master league it's self explainatory really because you have to add the npower teams in :)


Regarding the other forum which should have been called, Daymos you missed bit .lol
Perhaps someone wants to help put these in v3 before its frozen in a week..

When I say frozen,I mean after it's frozen v3 work begins and the party involved all work from the same for v3


Hey Daymos,

Thnx for the FIX Daymos!!, got it working now!! You're the M.A.N.!!!!!!!Great work absolutly stunning !!!Everybody bow down for this absolute PES Legend GOD Figure!!!!:w00t

Cheers
 

wolf_cesar

Registered User
Regarding the other forum which should have been called, Daymos you missed bit .lol
Perhaps someone wants to help put these in v3 before its frozen in a week..

When I say frozen,I mean after it's frozen v3 work begins and the party involved all work from the same for v3

If I understood well, me and Matt should wait until you tell us the correct version on which we'll start our v3 work, right?
 

JMTD

Registered User
So can anyone be kind enough to reupload this or email the file? I tried to get v 1.1 and 1.2 and both were down. Upon asking I was told to wait for this. I waited for this and now this is down. Appreciate the hard work but I'm tired of waiting now. Everybody has abused it and left nothing for the people still needing it. Any help is appreciated.
 
Top