For the best lawn care in cedar park, please visit our sponsor at lawn service cedar park They are a local lawn care and landscaping company that provide services in such as lawn care, lawn mowing, weeding, and landscape maintenance in Cedar Park, Austin, Round Rock, and Leander area. They are located at:

Lawn Care Service of Cedar Park 100 E Whitestone Blvd Ste 148, #166 Cedar Park, TX 78613 (512) 595-0884

ppf problem?

E

erros33

Registered User
i get the cean iso, apply the ppf version3 by fernando, the burn it 1x the slowest but i get a black screen, first time i get this in a patch, anyone know why?
 
Zygalski

Zygalski

Administrator
Some people have problems and it's hard to help without knowing everything that has been done. I suggest you follow the patching guide from that start.

Reset your PC and rip a clean ISO from your original disk and then apply the patch. Defragment your hard disk(s), reset the pc and then burn onto a DVDR at 1x or 2x.
 
I

ibra87

Registered User
I personally used pdx-ppf3 from megagames which is less user-friendly.. didn't test the progam in the guide so can't tell you if that's the problem.
 
Zygalski

Zygalski

Administrator
Thanks KingShorty. Edited to correct.

ibra87 said:
I personally used pdx-ppf3 from megagames which is less user-friendly.. didn't test the progam in the guide so can't tell you if that's the problem.
Click to expand...
Isn't it the same thing?
Link please.
 
Zygalski

Zygalski

Administrator
Thanks.
That file comes with more stuff but the part that applies ppf files looks the same to me.
 
I

ibra87

Registered User
Well, but advanced is always good to use.

And first time I burned (and only time i did) it also was black. At first i thought it was because I had made a psx/ntsc/launcher installed but then I restarted my ps2 twice, and made sure the cd wasn't damaged, and it worked. Also if you're pc is about 2 ghz you can try to boot the image with PCSX2. It gets in.. and you see stupid stuff all around the screen and a couple of sounds effects come before the game freezes. If that happens then nothing wrong with the image.
 
E

erros33

Registered User
ibra87 said:
Well, but advanced is always good to use.

And first time I burned (and only time i did) it also was black. At first i thought it was because I had made a psx/ntsc/launcher installed but then I restarted my ps2 twice, and made sure the cd wasn't damaged, and it worked. Also if you're pc is about 2 ghz you can try to boot the image with PCSX2. It gets in.. and you see stupid stuff all around the screen and a couple of sounds effects come before the game freezes. If that happens then nothing wrong with the image.
Click to expand...


how do you patch it with this programme?:ninja:
 
I

ibra87

Registered User
erros33 said:
how do you patch it with this programme?:ninja:
Click to expand...
If you're asking about the ntsc-pal or pal-ntsc then u simply open the program in the archive (which can be found in downlaods) then opent he program u want (there are 2, pal2ntsc and ntsc2pal). You press on the browse button and find the file then press patch. Then it's all done.
 
You must log in or register to reply here.
Top