UCL / Libertadores MAX Compatability, No Created Players, No Duplicates

[kambing999]

hi valencia....i just discover these player of the strongest that will write up NT player and liga MX / MLS

a. chumacero - j. v. watson (jamaica NT/new england)
f. pedrozo - p. aguilar (mexico NT/club america)
m. quiroga - j. aquino (mexico NT/tigres uanl)
d. wayar - m. orozco (usa NT/tijuana)
r. ballivian - e. castillo (usa NT/monterrey)
m. bejarano - j. santana (paraguay NT)

can you check on this....

 

[valencia5]

hi valencia....i just discover these player of the strongest that will write up NT player and liga MX / MLS

a. chumacero - j. v. watson (jamaica NT/new england)
f. pedrozo - p. aguilar (mexico NT/club america)
m. quiroga - j. aquino (mexico NT/tigres uanl)
d. wayar - m. orozco (usa NT/tijuana)
r. ballivian - e. castillo (usa NT/monterrey)
m. bejarano - j. santana (paraguay NT)

can you check on this....

Ok, I checked it out, I understand what happened here's the issue:

I created The Strongest to replace MN United FC, incase users did not want to use that team. Both were based on the default team Fovragizum.

What I see now, is the person who created MN United FC, used many of the "fake" versions of Those players you are talking about from the national teams: Watson, Aguilar, Aquino, Orozco, Castillo, Santana...remember now, Konami made them fake representations of the real life player, default name, and appearance is also different.

However, in the same pack, that you got the strongest. R8cha's MLS, and the other teams Tigres, Tijuana, America, NE Revolution, Monterrey are from the Liga MX OF. Copies of those players are there on their correct teams, with correct stats, and appearance.

I could move those players over, and re edit them, and now you would have duplicates. Or I could then delete the duplicates, but then we just end up in the same place we were originally....

If you have those teams, from the Liga MX, or MLS, or from my Kitpack, all the players should be accounted for. I double checked bro. Good luck.

 

[greenvpraze]

Ok, I checked it out, I understand what happened here's the issue:

I created The Strongest to replace MN United FC, incase users did not want to use that team. Both were based on the default team Fovragizum.

What I see now, is the person who created MN United FC, used many of the "fake" versions of Those players you are talking about from the national teams: Watson, Aguilar, Aquino, Orozco, Castillo, Santana...remember now, Konami made them fake representations of the real life player, default name, and appearance is also different.

However, in the same pack, that you got the strongest. R8cha's MLS, and the other teams Tigres, Tijuana, America, NE Revolution, Monterrey are from the Liga MX OF. Copies of those players are there on their correct teams, with correct stats, and appearance.

I could move those players over, and re edit them, and now you would have duplicates. Or I could then delete the duplicates, but then we just end up in the same place we were originally....

If you have those teams, from the Liga MX, or MLS, or from my Kitpack, all the players should be accounted for. I double checked bro. Good luck.

If I can help I will. When I made MN united I used created players, specifically so no players would interfere. So how is that team causing trouble?

 

[valencia5]

If I can help I will. When I made MN united I used created players, specifically so no players would interfere. So how is that team causing trouble?

I have no idea. I reset my rosters, and base copied both your MN United FC, and The Strongest to the same set of default players on Fovragizum...

So people could choose one or the other, since I thought, most people outside the US probably wouldn't be interested in MN even though I was, also so there wouldn't be any created players and we could elminate the chance peoples slots would get full from all the different exports.

With the MLS from R8cha, and the Liga MX from JordoJuansae/DLF, everything appears fine from my end...

 

[valencia5]

I personally have both MN United FC, and the strongest. I replaced Zamora instead on my OF, but I did not upload that version to the public.

 

[asderxsdxcv]

Valencia. Question about libertadores teams. I want to use liga mx and the other america teams. If i import the file and check the first box will i be able to do this? Instead of 7 liga mx teams. Im planning on 7 mls teams.

 

[valencia5]

yes, but rosters there could be conflicts. Because players are shared....

 

[asderxsdxcv]

yes, but rosters there could be conflicts. Because players are shared....

I see. Even with the second box tick too? If that dont make anydifference any tips on how i can do this?

 

[rammeal]

It is unfortunate you ignored/skipped right over my question all is well though, no love lost.

 

[valencia5]

Hi Valencia, I posted this in the other thread, I imported Rubin Kazan, Krasnodar and Trabzonspor from Erzo's pack and would love to change them for another team. I am hoping I shouldn't have any issues adding another team over those file.

Apologies, it was right at the bottom, I missed it unintentionally, there's just so many questions on numerous threads, lost it in the shuffle.

As long as the base teams are the same, chances of conflict are minimal. Otherwise, if base players are shared, it's not an easy solution, which is why I posted, every base team that was used in their creations.

 

[Sweep14]

Okay Mister Valencia, I'm nearly there. I need to find 3 Latin American teams that uses Carizupello, Marribohua, and Huatyncan as base teams and my file will be complete for Other Latin America's teams

Carizupello and Marribohua are teams ejected from PLA League as I'm using this for Liga MX (18 teams)

My only problem : The 3 teams I need to find can't be in that list :

ATLETICO_NACIONAL
BARCELONASC
BOLIVAR
CERRO
CERRO_PORTENO
EMELEC
GUAIRA
JAGUARES
LIGA_DE_QUITO
MEDELLIN
MELGAR
NACIONAL_URUGUAY
OLIMPIA
ONCE_CALDAS
PENAROL
SANTA_FE
SPORTING_CRISTAL
TACHIRA
THE_STRONGEST
UCV
ZAMORA

As I've already have them...

BTW It's easy to check which team is the base team used when importing a team : By ticking the first box in the import menu, you are asked to choose on which team to import and then it will display the default team used by the Of maker. If this team is already edited then it's a no go and you simply cancel the import

EDIT -> OFF topic but I asked at the official PES twitter account if they could pass a message to the dev team : I requested an option in edit menu to allow us to batch export a complete league, in addition to the team export option already present.

 

[FedeAzzurra79]

Hi Valencia,

Only you can save me now!

So I have the European teams covered, now I would like to use Erzo's MX and J-League, which are said to be duplicate free.

Now to fill up the Asian roster I could use the ones which you have posted. As for the Other Latin American teams, I have read about the Liga Aguila + Ecuador teams in the forum. I am not sure though about the duplicates, because if I try I mess it up and must start over again.

I need 23 teams but adding MLS teams is a little bit off with all due respect. What would you suggest?

Thanks Man!

 

[rammeal]

Apologies, it was right at the bottom, I missed it unintentionally, there's just so many questions on numerous threads, lost it in the shuffle.

As long as the base teams are the same, chances of conflict are minimal. Otherwise, if base players are shared, it's not an easy solution, which is why I posted, every base team that was used in their creations.

Thank you, I shouldn't assumed the worse I appreciate the response and happy to know that I can swap teams with very little issue.

 

[valencia5]

Okay Mister Valencia, I'm nearly there. I need to find 3 Latin American teams that uses Carizupello, Marribohua, and Huatyncan as base teams and my file will be complete for Other Latin America's teams

Carizupello and Marribohua are teams ejected from PLA League as I'm using this for Liga MX (18 teams)

My only problem : The 3 teams I need to find can't be in that list :

ATLETICO_NACIONAL
BARCELONASC
BOLIVAR
CERRO
CERRO_PORTENO
EMELEC
GUAIRA
JAGUARES
LIGA_DE_QUITO
MEDELLIN
MELGAR
NACIONAL_URUGUAY
OLIMPIA
ONCE_CALDAS
PENAROL
SANTA_FE
SPORTING_CRISTAL
TACHIRA
THE_STRONGEST
UCV
ZAMORA

As I've already have them...

BTW It's easy to check which team is the base team used when importing a team : By ticking the first box in the import menu, you are asked to choose on which team to import and then it will display the default team used by the Of maker. If this team is already edited then it's a no go and you simply cancel the import

EDIT -> OFF topic but I asked at the official PES twitter account if they could pass a message to the dev team : I requested an option in edit menu to allow us to batch export a complete league, in addition to the team export option already present.

I don't know which teams off of the top of my head use those teams. If there are only 3 teams. You can solve this problem in 5-10 minutes.

What you do is, please follow these steps VERY carefully or you could lose everything...

1. I would export my entire OF, through the PS4 menu to a USB in case you make an error. You can just reload it.

2. Go to the transfer menu in edit mode. Hit Triangle so it resets all team rosters to default, they will keep their edited name/stats, but will return to their team of origin. This is done to make sure you are editing the default players that are default to their particular base teams. DO NOT SAVE THIS.

3. Go to the import menu, choose any 1 team of your liking, and check both boxes, choose to import over somewhere near the top, like Bournemouth in EPL, less clicking and navigating. DO NOT SAVE

4. Next go to edit players, pick one of your three destination teams you said you need to fill: Carizupello,Marribohua, or Huatyncan.

5. One by one, base copy each player from the team you chose, from the team you imported over Bournemouth(just an example, but you can import anywhere).

6. ** Only if you need more players, transfer the lowest rated/oldest players to your base team, players likely not used, and continue base copying from Bournemouth until finished. EXPORT THIS TEAM, but STILL DO NOT SAVE

7. You now have your team of choice, with a base team/players that is compatible with your personal OF. So now go to Data Management menu, and now LOAD, which will reload your saved roster, from before we started this process.

8. Now import the new base team you exported in steps 5&6.

9. Now check to make sure all is ok, NOW SAVE.

10. Repeat for other two teams with same process.

Each team should take less than 5 minutes, so if only three teams to fill, this is what I would do. When doing so, do not sort your players in any way, leave them as unsorted and copy from first player to last. Easier to keep track that way.

Best of luck.

 

[valencia5]

Thank you, I shouldn't assumed the worse I appreciate the response and happy to know that I can swap teams with very little issue.

You have to make sure there are no conflicts. When using many OF's from different sources it takes a bit of planning. But these forums, have most of them documented. Check my post directly above this.

Also check my post #517 on the share teams thread, it's that type of process.

 

[valencia5]

Hi Valencia,

Only you can save me now!

So I have the European teams covered, now I would like to use Erzo's MX and J-League, which are said to be duplicate free.

Now to fill up the Asian roster I could use the ones which you have posted. As for the Other Latin American teams, I have read about the Liga Aguila + Ecuador teams in the forum. I am not sure though about the duplicates, because if I try I mess it up and must start over again.

I need 23 teams but adding MLS teams is a little bit off with all due respect. What would you suggest?

Thanks Man!

You don't need to start over if you mess up. When you have your rosters to a point in which you like, SAVE it to a USB before proceeding, so if things go wrong, you can reload to that save point.

Also I don't know the source and base teams for all of those off the top of my head. If it's few enough teams, check my post a few post above this about switching base teams.

I used the MLS personally, with 7 liga MX. I wish I could help you more...please feel free to elaborate exactly what your'e trying to do.

 

[Sweep14]

I don't know which teams off of the top of my head use those teams. If there are only 3 teams. You can solve this problem in 5-10 minutes.

What you do is, please follow these steps VERY carefully or you could lose everything...

1. I would export my entire OF, through the PS4 menu to a USB in case you make an error. You can just reload it.

2. Go to the transfer menu in edit mode. Hit Triangle so it resets all team rosters to default, they will keep their edited name/stats, but will return to their team of origin. This is done to make sure you are editing the default players that are default to their particular base teams. DO NOT SAVE THIS.

3. Go to the import menu, choose any 1 team of your liking, and check both boxes, choose to import over somewhere near the top, like Bournemouth in EPL, less clicking and navigating. DO NOT SAVE

4. Next go to edit players, pick one of your three destination teams you said you need to fill: Carizupello,Marribohua, or Huatyncan.

5. One by one, base copy each player from the team you chose, from the team you imported over Bournemouth(just an example, but you can import anywhere).

6. ** Only if you need more players, transfer the lowest rated/oldest players to your base team, players likely not used, and continue base copying from Bournemouth until finished. EXPORT THIS TEAM, but STILL DO NOT SAVE

7. You now have your team of choice, with a base team/players that is compatible with your personal OF. So now go to Data Management menu, and now LOAD, which will reload your saved roster, from before we started this process.

8. Now import the new base team you exported in steps 5&6.

9. Now check to make sure all is ok, NOW SAVE.

10. Repeat for other two teams with same process.

Each team should take less than 5 minutes, so if only three teams to fill, this is what I would do. When doing so, do not sort your players in any way, leave them as unsorted and copy from first player to last. Easier to keep track that way.

Best of luck.

No need to take care of player's position between origin team and destination team ? (no problem with a goalie becoming a striker for example ?)

 

[Jaiminho]

hey valencia. Again, props to you for the time you spend helping others. You have my respect.

hopefully this is an easy question to answer.

i have dfl 4.0 with your euro teams/libertadores and rocha mls.

as you may know, erzo has put out an updated jleague. i imported it and noticed it started to overwrite teams like persepolis in afc champions etc....obviously a conflict happening. Will you be adding erzo excellent jleague to your game. How do you suggest getting around this issue?

thanks in advance

 

[valencia5]

hey valencia. Again, props to you for the time you spend helping others. You have my respect.

hopefully this is an easy question to answer.

i have dfl 4.0 with your euro teams/libertadores and rocha mls.

as you may know, erzo has put out an updated jleague. i imported it and noticed it started to overwrite teams like persepolis in afc champions etc....obviously a conflict happening. Will you be adding erzo excellent jleague to your game. How do you suggest getting around this issue?

thanks in advance

Haha we're on the same wavelength bro. I suggest you wait a few hours, I have to take my woman to dinner, and then I'll be in the process of making a compatible Asian pack, will upload tonight for sure. Take care my friend.

To everyone else, please post suggestions, requests, and links teams you would want for this pack. I'll do my best to make it likeable to a majority of everyone.

 

[valencia5]

Done, link is on the OP.