Basic Patching Guide for PES4
(scroll down to see the same guide for WE8:LE)
First of all you need to use your original PES4 DVD to make an image onto your PC and then patch it. And you need a DVD-burner with blank DVDRs
1. Downloads.
You will need to use these programs
a)DVD Dycrypter,
http://fileforum.betanews.com/download/1011845169/1
http://www.dawnload.net/video_softw...d_decrypter.cfm
b)ppf-o-matic3 (also known as pdx-pom3)
http://www.paradogs.com/download/pdx-pom3.zip
c) CD/DVD burning software such as Nero or Alcohol120%.
d) Plus the PES4 patch you want to use - such as the jonboyo one found
here.
Most patches come compressed as rar files so you need to check
this thread to find out how to unrar (uncompress) these to give you the actual patch files which are .ppf files.
2.
Create an ISO from your original PES4 dvd game using dvd decrypter or other ripping program.
a) Put your Original PES4 dvd in your PC dvd drive
b) Open DVD Decrypter, go to MODE /ISO / Read
c) Choose your destination folder eg origPES4
d) Press the go button (dvd->Harddrive symbol)
(pic thanks to jag87)
This gives you your original ISO.
3.
Open ppf-o-matic3. Select your ISO file from above.
Select your .ppf patch file. Click Apply. Wait for the ISO to be patched.
If you also have patch update files, you can now apply them to your ISO as well using the same method. Select the same ISO and the next patch and click Apply.
Read the instructions that come with each patch to see if there are any other methods or techniques you need to use when patching. This is the most common and basic method usually used.
4.
Now you are ready to burn your patched ISO image.
I tend to defragment my hard disk at this point. Then you should shut down all other programs (or better yet, reset your PC).
Open Nero or Alcohol120% and select the
Burn As Image or
Burn Image option. Select your patched ISO file. Insert a blank DVDR and set the speed to be as slow as possible as this is better for the life of your PS2 laser. If you use cheap DVDR types and/or fast burning speed, this is not good for the life of your PS2 laser. Set it to burn and leave it for a while. It will take time so be patient and don't mess with your PC otherwise there is a chance that the patched disk won't run.
Once it has burned you can now play your patched version of PES4 on your modified PS2 (using either a chip or a fliptop lid or a slide card - more details on this over
here).
If you can follow these instructions, you will soon be playing PES4 looking like this for example:
(thanks to jonboyo's 10th october patch for PES4).
This is a basic and simple guide to patch PES4. If you have a dvd-burner and a modded PS2 then you should have very few problems. Post questions and such here and we can try to help you.
you gave different instructions for the british premeir patch,i did all the shit it said with dkz but got lost on how to burn,ppf-o it's easier.like i said when i tried to play the mammy rammer all i got was the playstation sighn.playing reefur&french one fine....so wuuussssuuupppp?
===================================================
=============================
===================================================
Basic Patching Guide for WE8:LE
First of all you need to use your original WE8:LE DVD to make an image onto your PC and then patch it. And you need a DVD-burner with blank DVDRs.
1. Downloads.
You will need to use these programs
a)DVD Dycrypter,
http://fileforum.betanews.com/download/1011845169/1
http://www.dawnload.net/video_softw...d_decrypter.cfm
b)ppf-o-matic3 (also known as pdx-pom3)
http://www.paradogs.com/download/pdx-pom3.zip
c) CD/DVD burning software such as Nero or Alcohol120%.
d) Plus the WE8:LE patch you want to use - such as the reefur one found
here.
Most patches come compressed as rar files so you need to check
this thread to find out how to unrar (uncompress) these to give you the actual patch files which are .ppf files.
2.
Create an ISO from your original WE8:LE dvd game using dvd decrypter or other ripping program.
a) Put your Original WE8:LE dvd in your PC dvd drive
b) Open DVD Decrypter, go to MODE /ISO / Read
c) Choose your destination folder eg origWE8LE
d) Press the go button (dvd->Harddrive symbol)
(pic thanks to jag87)
This gives you your original ISO.
3.
Open ppf-o-matic3. Select your ISO file from above.
Select your .ppf patch file. Click Apply. Wait for the ISO to be patched.
If you also have patch update files, you can now apply them to your ISO as well using the same method. Select the same ISO and the next patch and click Apply.
Read the instructions that come with each patch to see if there are any other methods or techniques you need to use when patching. This is the most common and basic method usually used.
4.
Now you are ready to burn your patched ISO image.
I tend to defragment my hard disk at this point. Then you should shut down all other programs (or better yet, reset your PC).
Open Nero or Alcohol120% and select the
Burn As Image or
Burn Image option. Select your patched ISO file. Insert a blank DVDR and set the speed to be as slow as possible as this is better for the life of your PS2 laser. If you use cheap DVDR types and/or fast burning speed, this is not good for the life of your PS2 laser. Set it to burn and leave it for a while. It will take time so be patient and don't mess with your PC otherwise there is a chance that the patched disk won't run.
Once it has burned you can now play your patched version of WE8:LE on your modified PS2 (using either a chip or a fliptop lid or a slide card - more details on this over
here).
This is a basic and simple guide to patch WE8:LE. If you have a dvd-burner and a modded PS2 then you should have very few problems. Post questions and such here and we can try to help you.
