For the best lawn care in cedar park, please visit our sponsor at lawn service cedar park They are a local lawn care and landscaping company that provide services in such as lawn care, lawn mowing, weeding, and landscape maintenance in Cedar Park, Austin, Round Rock, and Leander area. They are located at:

Lawn Care Service of Cedar Park 100 E Whitestone Blvd Ste 148, #166 Cedar Park, TX 78613 (512) 595-0884

cant kick ass online

jelly1

Registered User
chaps every time i go to network i get this
UNABLE TO TRANSMIT USING UDP PORT 5730
U MAY NEED TO CONNECT DIRECTLY TO THE INTERNET OR ADJUST CONNECTION DEVICE, ROUTER SETTINGS
ASSIGN DMZ, PORT MAPPING,CONFIGURE NAT TABLE AND OTHER ROUTER SETTINGS TO THE CONSOLE
any ideas im on xp wiv sp2 and avg and zone alarm any ideas?
 

Onetimer

Registered User
You should forward the port 5730 if I remember correctly. I think It's not possible if you have the free version of Zone Alarm. Try Kerio Personal firewall instead.
 

This-is-our-time

Registered User
diable zone alarm and any other firewalls and anitvirus except the xp one. Make sure you allow pes5 as an exception in your windows firewall.

Are you behind a router, if so you need to forward udp port5730 in your router settings. www.portforward.com if you have problems. You wil laso have to turn on DMZ if you have the option in yor router. Shoudl connect then, but it may not. I cant play with my router as it is crap so I have to play with orginal modem, which means wires all over the place ;o(
 

demoncleaner

Registered User
I also run AVG and Zone Alarm. All I had to do was allow pes5 to connect to and to accept connections from the internet when the zone alarm bubbles appeared. There's no need to disable zone alarm, and just make sure that windows firewall is switched off.
I imagine the problem you have, as mentioned above, is to do with a router.
 

ricky dalglish

New Member
assign your ip address to the port 5730 in router settings and also look for an option to allow dmz, this just sort of opens up your internet connection to use the ISS pro server, it took me a bit of fiddling to finally get online play but it is worth, had a 1-1 draw as my first attempt, so im unbeaten!!! lol
 

jelly1

Registered User
can some 1 do a step by step of how to open ports cos i cannot find them , i havent got a admin logon do i need 1??
 

spermi

New Member
I got the same problem.My rooter is Jetspeed 520.Can anyone explain step by step about this DMZ thing?
 

Dundon's

W.G.P
Nice to see every one so helpfull for a change.

Good job men ;)

P.S. I just switch off my firewall altogether.
 
Top