For the best lawn care in cedar park, please visit our sponsor at lawn service cedar park They are a local lawn care and landscaping company that provide services in such as lawn care, lawn mowing, weeding, and landscape maintenance in Cedar Park, Austin, Round Rock, and Leander area. They are located at:

Lawn Care Service of Cedar Park 100 E Whitestone Blvd Ste 148, #166 Cedar Park, TX 78613 (512) 595-0884

Dummy's guide to playing we7i:j net rip with sm/dvdregion/AR

gam3r

Registered User
Dummy's Guide to playing WE7I:Japan Net Rip with SM/DVDRegionX/AR!

Hi all, after 12 cd-rs, about 12 or probably more hours trying to get my pimp rip to work, i finally cracked it. I have wrote this in mind for people like me, who struggled to find a easy and simple solution to playing we7i:j. I had success on my 12th cd-r, but im aiming for all of you to have 1st,2nd or even 3rd time success.
A bit of advice:when following the steps, take your time, re-read, and re-check what you've done. This will lower the chances of a bad burn.Good luck!

Tools you will need

CDGENps2 availible here http://www.richpsx.com/playstation2/utilities/cdgenps2v2.zip
CDMAGE B5 http://ftp.uevora.pt/pub/Mirrors/CDmage/CDmage1-02-1B5.rar

1)Preparation (if you are applying a patch apply it before you do anything else and remember to use the size_x.AFs you made with afsexplorer if u use wefantasy's patch)

a) if you are using the PIMP jap rip, open cdmage then open your bin in it.
Choose these files if you have the jap rip :
DATA_J.AFS,
all the size_x.afs,
SLPM_654.97
SYSTEM.CNF
WE7IJ.PSS
OVER.AFS
IOP folder

And extract them to a convienient folder for u. I used desktop and i created a new folder.(if you have a engrip extract data_e instead)

b) now you should have those files inour folder where you extracted them.
Open up cdgenps2. and also open up the folder where you extacted the files from your bin.

making the image part 2

c) Now start draggin the files in this order into cdgen ps2.
1) drag the IOP folder into cdgen ps2. Right click the folder IOP in cdgenps2 and click "edit" Tick the "fix lba box" and change the lba to 23. Click ok.

Now drag in the CDLIST.DIR file into cdgenps2. Right click on it and click edit then tick "fix lba" and change the lba to 351. Click ok

Now To create dummies for your DATA_X.AFS files. Click EDIT>CREATE A DUMMY. Create a dummy DATA_E.AFS. Use the same filesize as your real DATA_J.AFS. To check the filesize accuratly open the DATA_J in cdgenps2 and record the filesize.
Change the lba to 352 by ticking "fix lba"

You should have something like this now.

Create one of these for E,F,G,I using the same settings.( it doesnt matter if your size is different because chances are it will be)

2)when you finish making the dummy for data_i.afs, drag in your real Data_J.afs which u extracted and change the lba of that to 352.(or it may be default allready)

When you are finished doing this, create a dummy for DATA_S.AFS using the same settings as i described before.

3)creating a dummy.

When you have finished creating a dummy for data_s.afs, click edit, Create a dummy and make sure the dummy is called DUMMY.BIN and the lba is fixed to 282440 and the filesize is fixed to 0. click ok.

Now its the easy part. now just drag in the rest of the files u extracted leaving the lba default.
Drag into cdgenps2 in this order:
OVER.AFS
the six SIZE_X.AFS files
SLPM_654.97
SYSTEM.CNF
WE7IJ.PSS.

Then Your done! all you have to do now is save the image in cdgenps2. Just push the IMG button on the left and choose a directory and click save.
This was my final outcome of my cdgenps2 session.


Final stages

Now the final few bits. save your cdgenps2 compilation for later use and close cdgenps2 after you have made a image using it.

Open up cdmage then open the bin file you have just made. Now click on the image you have just loaded(where it says track1 blablah on the left) and then click Action(from the menu bar)>then click scan for corruption. Leave everything on default and click ok. It will start scanning.

When the scan has finished, it will say if there are any currpt secotrs in the image. If there are, (i had 16) click Action(from the menu bar)> then click repair corrupted sectors. Leave everything on default and click ok.

When it has finally finished repairing you can start preparing your cd-r.
In this tutorial i will explain using both nero and alcohol 120%.

Alcohol 120%
1. Click burn image
2.Load the cuesheet
3)Set the burn mode to playstation 2 and put the speed at 4x
4) click burn!

Nero
1.Open nero
2.Click Recorder from the menu bar> burn image
3.Choose disc and once and 4x speed
4.Burn!

I hope you are successful in this! enjoy the game!!!!!

This guide was written for the pes/we fanatics by gam3r.If you use this guide anywhere please give due credit to gam3r
 

gam3r

Registered User
yay go ahead :D do get back to me if it works but if your having trouble ill upload my .ps2 file for ya
 

gam3r

Registered User
ok im not sure my ps2 file will work but try it anyway. Remember to put the extracted files from step 1 into C:/WE7I otherwise my .PS2 file for cdgen pos2 will not work.

EDIT ill upload it later cuz i cant find a host.
 
J

jag87

Guest
Apparantly, some jap rips have corrupted files. That may stop some people.
 
J

jag87

Guest
Hmm, I tried the instructions but they dont work. Gam3r's image vary's from his instructions :?
 
J

jag87

Guest
Yeah i have msn. Thing is mate, when i put it on the ps2, it just makes a noise like its going to take off.
 

ashmufc

Registered User
gam3r said:
glad to see its workin for u kf2002. im using philips cd-r 80mins 700mb

gam3r did you get it to work with the actual pimp rip(ie tlf console), i thought you only tried the pre patched one, kf2002, what rip did you use. I can't get mine to work, can you send me a screenie of your cdgpen please.
 
Top