So hard to search? And by the way if you want to add the kits all manually then you must have a lot a lot of spare time. I recommend just to patch your WE7.
Guide by Larsson:
PATCHING
The most patches come along in ppf-format, these files are easy to handle and there shouldn't be any problems.
There are many ways of creating images and burning, so I'll post only my method here. For PES3 you first need to rip your DVD to CD size, so you don't have to follow steps 1+2, start with 3. Check the ripping guide here on the forum if you want to know how to create a ripped image of PES3.
1. Get CDRWin from here, I use version 3.9d, but I think the important functions will be the same in almost all versions
2a. Go to "Extract Disc/Tracks/Sectors to Image" -> extract mode "Disc Image/Cue sheet" -> select the drive you have your original (unpatched) WE7 in, select the folder you want to save your image to, name it WE7
2b. Reading options -> RAW
Error Recovery -> Abort
Jitter Correction -> Auto
Subcode Analysis -> Auto
-> You'll get WE7.bin and WE7.cue (cue should be always in the same folder like the bin)
3. DL your patch and ppf-o-matic 3, you can get it from here
4. Open ppf-o-matic, then load your image and your ppf patch and click on apply, wait a couple of minutes, you should get a "patch succesfully applied" message
5. Open CDMage, you can download it eg from here -> "file" -> "open" then select your patched image, "mode M2/2352 track (bin....)" -> "scan for corruption" -> repair and rebuild damaged sectors if necessary
6. Open CDRWin again -> "Record disc" -> "Load cuesheet" (select the cue from step 2b.) ->"Raw mode" -> "speed 4x or 8x" -> "start recording"
Alternative solution if you have fireburner:
"import tracks from cuesheet" -> select your WE7.cue from 2b. and your WE7.bin will be loaded automatically into Fireburner -> "configuration" -> "device option" ->
- burning speed 4x or 8x
- session at once
- leave session open
- autocorrect sub-channel
- disable test-burn
-> "create CD" -> "burn"
Note:
Some PES3-patches need to be applied not to the image but to the data_e.afs, so extract the data_e.afs with CDMage, apply the patch like in step 4., but to the data_e.afs, then import the patched file back into CDMage. Read always the readme file of the patches.
