For the best lawn care in cedar park, please visit our sponsor at lawn service cedar park They are a local lawn care and landscaping company that provide services in such as lawn care, lawn mowing, weeding, and landscape maintenance in Cedar Park, Austin, Round Rock, and Leander area. They are located at:

Lawn Care Service of Cedar Park 100 E Whitestone Blvd Ste 148, #166 Cedar Park, TX 78613 (512) 595-0884

PES4 Kit & Sponsor Editing Step-by-Step Guide For Beginners

qwerty12

Registered User
You little angel dannyboy20, may the seeds of your loin be fruitful in the belly of your woman. But if your only like 12 years old and just really good on computers, dont have sex until your 16 at least.
 

dannyboy20

Registered User
MAN UTD (Home)

Kit Design - I've chosen the following shirt as it has the white stripes along the shoulders, the downside is you also have to have white underneath the sleave. Colours used (left to right): red, white, red. Also I used socks that had a red stripe near the middle.



Sponsor Editor - Here I used a text slot for the vodafone text, a logo slot for the vodafone logo and a logo slot for the nike logo.



Font Type - There is no text that matches the vodafone font so I just chose the 2nd font down.

Sponsor Layout -



Vodafone Logo - 8x zoom. Here i chose the circle tool and create an hollow circle from the top left pixel to the bottom right pixel. I used that for a base for the outa edge of the circle.



Final Shirt -

 

dannyboy20

Registered User
MAN UTD BADGE

For the badge on the actual kit, after I completed this below I went into layer edit and resized the badge smaller to make it look better on the kit itself.

Also you don't have to do any detail really, such as the Manchester United text. You won't see it on the actual badge on the kit.

4x Zoom:




8x Zoom:


 

MattShez

PPL Manager
could you please tell us which colour red it is or point it out, i think i use the second 1 vertically but it can appear slightly orange at some stages
 

*wolf*

Registered User
I have to admit that is difficult to make the badges/emblen, dannyboy20, how did you do that? I have read through your guide, to make font seem fine for me, but like Nike, Puma, it is difficult.
 

dannyboy20

Registered User
*wolf* For the Nike follow my Arsenal kit guide, the nike logo is in there, just copy that exactly :) Haven't done puma yet though...

matt - I haven't got a clue which colours I used, i just tried a few different shades to see which looked ok.
 

The-Clash

Registered User
Birmingham City Kit

I've done the Birmingham city kit, and it looks pretty damn good. Quite easy to do.

for the sponser, flybe.com, do "fly" "be" and ".com" on the third font down, (not all together as they don't fit.) Then create a logo, you use the smallest grid squares and do a red line 10 squares long, then an orange one the same length. Then create another logo with a yellow line 10 squares long and a light yellow the same length again. When this is done, put both logos together underneath the "be". Looks exact!

I will try to get pictures for you!
 

joeycole26

Registered User
Chelsea Home

For the shirt, it is all blue and has no coller. The shorts are blue with a white line down the side, and the socks are white with a blue line.
http://forum.pesinsight.com/attachment.php?attachmentid=1996&stc=1


For The Sponsor.
Layout - http://forum.pesinsight.com/attachment.php?attachmentid=1997&stc=1


We have the fly on one text block and emirates on another. If we were to make them bigger emirates woulnt fit onto the shirt. We also have the umbro logo. The text needs to be the 2nd down. it also must be white.
The umbro logo
http://forum.pesinsight.com/attachment.php?attachmentid=1999&stc=1

Where to place emblem, sponsor, logo
http://forum.pesinsight.com/attachment.php?attachmentid=2000&stc=1

i will put the emblem on later, can anybody tell me how to put pics in the post, the links are the pics
 

dannyboy20

Registered User
MAN UTD (Away)

Unfortunately you can't have 1 badge in the middle for the home shirt and a badge on the right for the away. So its up to you where you choose to put the emblem, but it will also change on the home shirt too.

Kit Design - I chose to have a plain black shirt for the away top. I couldn't find a shirt that gave me the 2 white lines around the collars. The colour order is: black, black, black. The shorts design is very accurate. The colour order for these is black, white, white. The sock design is also as accurate as I could find, colour order: black, white.



Sponsor Editor - This was basically the same as the home shirt, except i moved the emblem over to the right instead of in the middle.



Final Away Shirt:

 

dannyboy20

Registered User
CHELSEA (Home)

Kit Design - Here is the kit design for the shirt. The colours in order are: Blue, Blue, White. Shorts are blue and the socks white.



Sponsor Editor: Here I used 2 text layers, one for "Fly" and one for "Emirates". Also I used a logo layer for the Umbro logo.



Font Type - Unfortunately you can't use the largest font for Emirates as it's too big. Instead I used the 4th font down for "Fly" and the 5th font down for "Emirates"

Sponsor Layout:



Umbro Logo - 8x zoom, smallest grid. This Umbro sign may be too big for some people, if so just make it smaller.



Final Shirt -

 

dannyboy20

Registered User
CHELSEA (Away)

Kit Design - Here are the design i've chosen. With this kit you can have the grey colour around the arms and also the neck but it also adds a grey line across the shoulder. The colours used were: Black, Black, Lighest Grey.

For the Shorts I used this design, and the colours: Light Grey, Black, Black. Finally the socks were Black, Light Grey.



Sponsor Editor - Unfortunately due to you only being allowed one badge for both home and away kits I chose to have the circle around the CFC crest on both of them.



Final Away Shirt:

 

dannyboy20

Registered User
CHELSEA BADGE

Due to the contraints of the editor. You can't have one CFC badge with a circle around it (home shirt) and one without the circle (away shirt). So if you think its best to have both the home and away shirt without the circle then just leave it out.

This isn't very accurate, but it looks okay when the badge is on the shirt. I also made the logo smaller in layer mode after I drew it as below.

4x Zoom:



8x Zoom:

 

dannyboy20

Registered User
LIVERPOOL BADGE

This doesn't look that good zoomed in but it looks okay on the kit. You will have to make it smaller too in layer mode once you are done else the badge will look massive on the shirt.

Also i haven't drew the shield shape around the crest as I created a large badge instead.

4x Zoom:



8x Zoom:

 
Top