PES4 Kit & Sponsor Editing Step-by-Step Guide For Beginners
- Thread starter dannyboy20
- Start date
dannyboy20
Registered User
veron70 said:
Yeah but what are you asking? For a guide to the kits?? Like i said, check my first post in the thread, i've listed the teams i've already done with links to them...including arsenal and man u.
Adam bateman
Registered User
how did u get the logos (e.g. thomson logo) that big on the shirts cos thay always seem 2 cum up 2 small on my shirts and look stupid. thanks
dannyboy20
Registered User
Adam bateman said:
Like I said, follow my guide EXACTLY, for the logo's copy them pixel by pixel. And you come up with the same as me.
Kawaii Jorn
Registered User
Danny, can you make the Liverpool kit as well?
dannyboy20
Registered User
LIVERPOOL (Home) - This Season
Right i've created 2 designs for Liverpool. This seasons shirt and last seaons. The reason is, this seasons shirt doesn't look too good due to you only being allowed 2 logo layers, but people still may want to use it. Last seasons shirt looks very good created, so i'm going to post that too.
This seasons first:
Kit Design - For this I chose a kit with a round collar and put all colours red. Plain red shorts and white socks.
Sponsor Editor - Here all layers were used. First I placed an uppercase C on the shirt with the largest font (3rd font down). Then for the next text layer I used a smaller font for "arl", the next layer "sbe" and the final text layer "rg". I've done it this way so I could space the word out.
Sponsor Layout -
Reebok Logo - This was the same one used for the Bolton shirt. Except I used a white colour for a logo and transparent in the middle. Here is the template: http://www.danny18.pwp.blueyonder.co.uk/pes4edit/bolton/boltonreeboklogo.jpg
Carslberg Line - 8x Zoom
Final Shirt - Not too good like I said, but last seasons kit below is a lot better.
Right i've created 2 designs for Liverpool. This seasons shirt and last seaons. The reason is, this seasons shirt doesn't look too good due to you only being allowed 2 logo layers, but people still may want to use it. Last seasons shirt looks very good created, so i'm going to post that too.
This seasons first:
Kit Design - For this I chose a kit with a round collar and put all colours red. Plain red shorts and white socks.
Sponsor Editor - Here all layers were used. First I placed an uppercase C on the shirt with the largest font (3rd font down). Then for the next text layer I used a smaller font for "arl", the next layer "sbe" and the final text layer "rg". I've done it this way so I could space the word out.
Sponsor Layout -
Reebok Logo - This was the same one used for the Bolton shirt. Except I used a white colour for a logo and transparent in the middle. Here is the template: http://www.danny18.pwp.blueyonder.co.uk/pes4edit/bolton/boltonreeboklogo.jpg
Carslberg Line - 8x Zoom
Final Shirt - Not too good like I said, but last seasons kit below is a lot better.
dannyboy20
Registered User
LIVERPOOL (Home) - Last Season
This is the better kit for creating in edit mode, but it's last seasons. Your choice
Also I used Beatts design over @ evo-web for this, so he deserves credit too.
Kit Design - I used the same design as the one above, there is probably a better one though, choose yourself.
Sponsor Layout - Here I used the 2 logo layers to create the "Carls" and "berg" sponsor. The text layers were used for the Reebok text at the top. Using the 1st smallest font. I did it in 2 stages as the "ok" are further apart if you just use 1 layer. Also I put an hyphen in as the squiggly Carlsberg line left a gap so the hyphen filled the gap up.
Sponsor Layout -
Carlsberg Sponsor (Part 1) - 8x Zoom
Carlsberg Sponsor (Part 2) - 8x Zoom
Final Shirt - It looks better in a match by the way...
This is the better kit for creating in edit mode, but it's last seasons. Your choice
Also I used Beatts design over @ evo-web for this, so he deserves credit too.Kit Design - I used the same design as the one above, there is probably a better one though, choose yourself.
Sponsor Layout - Here I used the 2 logo layers to create the "Carls" and "berg" sponsor. The text layers were used for the Reebok text at the top. Using the 1st smallest font. I did it in 2 stages as the "ok" are further apart if you just use 1 layer. Also I put an hyphen in as the squiggly Carlsberg line left a gap so the hyphen filled the gap up.
Sponsor Layout -
Carlsberg Sponsor (Part 1) - 8x Zoom
Carlsberg Sponsor (Part 2) - 8x Zoom
Final Shirt - It looks better in a match by the way...
dannyboy20
Registered User
MIDDLESBROUGH (Home)
Kit Design - This kit design will let you have the white stripe across the chest that looks pretty near the size of the real stripe. Colours in order: Red, Red, White.
The shorts have a stripe going right down the side, colours used: Red, White, White. Socks have stripes at the top - Red, White.
Sponsor Editor - Here i used 2 text layers and 2 logo layers. One text layer was for "888" in which the largest font was used (third font down). The other text layer was used for the ".com" which was in lowercase and used the 2nd font down.
The dice for above the .com were also drawn using the logo layer., a little help from whistles kit design i got it looking good. The other logo layer was used for the Errea logo, i based this on Goal's great design.
Sponsor Layout -
Boro Dice - 8x zoom. Here a few shades of red were used in created the different sides of the dice. A little help from whistle's kit too.
Errea Logo - 8x zoom. Based on goals design.
Final Home Shirt -
Kit Design - This kit design will let you have the white stripe across the chest that looks pretty near the size of the real stripe. Colours in order: Red, Red, White.
The shorts have a stripe going right down the side, colours used: Red, White, White. Socks have stripes at the top - Red, White.
Sponsor Editor - Here i used 2 text layers and 2 logo layers. One text layer was for "888" in which the largest font was used (third font down). The other text layer was used for the ".com" which was in lowercase and used the 2nd font down.
The dice for above the .com were also drawn using the logo layer., a little help from whistles kit design i got it looking good. The other logo layer was used for the Errea logo, i based this on Goal's great design.
Sponsor Layout -
Boro Dice - 8x zoom. Here a few shades of red were used in created the different sides of the dice. A little help from whistle's kit too.
Errea Logo - 8x zoom. Based on goals design.
Final Home Shirt -
dannyboy20
Registered User
MIDDLESBROUGH BADGE
I've created a fair bit of detail in this badge. When it's created it will look VERY big on the shirt. So resize it in layer edit mode once you are done.
4x Zoom -
8x Zoom -
I've created a fair bit of detail in this badge. When it's created it will look VERY big on the shirt. So resize it in layer edit mode once you are done.
4x Zoom -
8x Zoom -
dannyboy20
Registered User
FULHAM (Home)
Kit Design - The kit can be created pretty accurately with the desins below. The shirt has colours: White, Black, White.
The shorts have a diagnal line across them with colours: Black, White, Red.
The socks colours are: White, Black.
Sponsor Editor - Here i've used all slots available. I used the 1st text layer for "dabs" using the largest font (3rd font down). Each of the other text layers were used for the "c" "o" and "m". I could push them closer together doing it this way.
The first logo layer was using for the dabs logo and the final layer was used for the puma logo.
dabs.com logo - 8x zoom. Here i used the whole of the canvas area available more or less so you will have to scroll up or down when creating. The pic below i've just taken 2 pics and put them together.
Puma logo - I used whistles puma design for a template for this. So thanks go to him.
Final Home Shirt -
Kit Design - The kit can be created pretty accurately with the desins below. The shirt has colours: White, Black, White.
The shorts have a diagnal line across them with colours: Black, White, Red.
The socks colours are: White, Black.
Sponsor Editor - Here i've used all slots available. I used the 1st text layer for "dabs" using the largest font (3rd font down). Each of the other text layers were used for the "c" "o" and "m". I could push them closer together doing it this way.
The first logo layer was using for the dabs logo and the final layer was used for the puma logo.
dabs.com logo - 8x zoom. Here i used the whole of the canvas area available more or less so you will have to scroll up or down when creating. The pic below i've just taken 2 pics and put them together.
Puma logo - I used whistles puma design for a template for this. So thanks go to him.
Final Home Shirt -
dannyboy20
Registered User
FULHAM (Away)
Kit Design - This is the closest I could find, it looks ok but the white line continues right down the sides of the shirt. There may be another so check first.
Colours used: Light Blue, White, Black.
Shorts: Not sure if these shorts are accurate but they look ok. Colours: White, Black, Black.
Socks: Chose ones with a thin stripe near the top. Colours: Light Blue, Black.
Sponsor Editor - Here I changed all the layers to White, assuming you already did the home kit. The downside is because the home strip has the badge in the middle, so you are stuck with it for the away strip. Unless of course you put the badge on the right for both home and away. Up to you.
Final Away Shirt - Again you can't do anything about the badge being in the middle, unless you change the position on the home shirt also.
Kit Design - This is the closest I could find, it looks ok but the white line continues right down the sides of the shirt. There may be another so check first.
Colours used: Light Blue, White, Black.
Shorts: Not sure if these shorts are accurate but they look ok. Colours: White, Black, Black.
Socks: Chose ones with a thin stripe near the top. Colours: Light Blue, Black.
Sponsor Editor - Here I changed all the layers to White, assuming you already did the home kit. The downside is because the home strip has the badge in the middle, so you are stuck with it for the away strip. Unless of course you put the badge on the right for both home and away. Up to you.
Final Away Shirt - Again you can't do anything about the badge being in the middle, unless you change the position on the home shirt also.
dannyboy20
Registered User
FULHAM BADGE
Here i used a modified version of AndyRaeside's (from neoseeker) excellent template. It's basically the same but the FFC text seemed a bit thick so i removed the black lines and edited here and there. Thanks go to andy though for the initial template.
4x zoom -
8x zoom -
Here i used a modified version of AndyRaeside's (from neoseeker) excellent template. It's basically the same but the FFC text seemed a bit thick so i removed the black lines and edited here and there. Thanks go to andy though for the initial template.
4x zoom -
8x zoom -
dannyboy20
Registered User
ASTON VILLA (Home)
Kit Design - This design is the nearest one you are going to get I think. You can't get the arrows down the sleeves.
1st Colour: Last Row, 7th Across
2nd Colour: Last Row, 7th Across
3rd Colour: Top Row, 3rd Across
The Shorts have a large strip down the side. Colours: White, White, Last Row-7 across.
The Socks have a stripe at the top. Colours: White, Top Row-3 Across.
Sponsort Editor - Here I used all layers. I used DWS on 3 different layers so I could space them out. The logo layers were used for the "C" and also for the "investments" text.
The 1st text layer was used for the "hummel" sponsor. 6th font down.
The 2nd text layer was used for the "D". 2nd font down.
The 3rd text layer was used for the "W". 2nd font down.
The 4th text layer was used for the "S". 2nd font down.
CDWS logo - 8x zoom. Here you will have to scroll up and down the canvase to get it all on.
Investments Logo - 8x zoom
Final Home Shirt -
Kit Design - This design is the nearest one you are going to get I think. You can't get the arrows down the sleeves.
1st Colour: Last Row, 7th Across
2nd Colour: Last Row, 7th Across
3rd Colour: Top Row, 3rd Across
The Shorts have a large strip down the side. Colours: White, White, Last Row-7 across.
The Socks have a stripe at the top. Colours: White, Top Row-3 Across.
Sponsort Editor - Here I used all layers. I used DWS on 3 different layers so I could space them out. The logo layers were used for the "C" and also for the "investments" text.
The 1st text layer was used for the "hummel" sponsor. 6th font down.
The 2nd text layer was used for the "D". 2nd font down.
The 3rd text layer was used for the "W". 2nd font down.
The 4th text layer was used for the "S". 2nd font down.
CDWS logo - 8x zoom. Here you will have to scroll up and down the canvase to get it all on.
Investments Logo - 8x zoom
Final Home Shirt -
dannyboy20
Registered User
ASTON VILLA (Away)
Kit Design - This kit design seems ok and looks decent enough.
1st Colour: White
2nd Colour: Last Row, 7th Across
3rd Colour: Last Row, 7th Across
The shorts are the same design as the home. Colours: Top Row-6th Across, Top Row-6th Across, Bottom Row-7th Across.
The socks had 2 stripes at the top. Colours: White, Bottom Row-7th Across.
Sponsor Editor. This was the same as the home strip. Except the hummel text was changed to black. And the rest of the text and logos were changed to the following shade of blue:
R,G,B: 0,47,110
Final Away Shirt -
Kit Design - This kit design seems ok and looks decent enough.
1st Colour: White
2nd Colour: Last Row, 7th Across
3rd Colour: Last Row, 7th Across
The shorts are the same design as the home. Colours: Top Row-6th Across, Top Row-6th Across, Bottom Row-7th Across.
The socks had 2 stripes at the top. Colours: White, Bottom Row-7th Across.
Sponsor Editor. This was the same as the home strip. Except the hummel text was changed to black. And the rest of the text and logos were changed to the following shade of blue:
R,G,B: 0,47,110
Final Away Shirt -
dannyboy20
Registered User
ASTON VILLA BADGE
This was based on another one of AndyRaeside's (from neoseeker) templates. It's more or less exactly the same so all credit goes to him for this.
Also the badge will need to be made smaller in layer edit mode when you have finished else it will look really big on the shirt.
4x Zoom -
8x Zoom -
This was based on another one of AndyRaeside's (from neoseeker) templates. It's more or less exactly the same so all credit goes to him for this.
Also the badge will need to be made smaller in layer edit mode when you have finished else it will look really big on the shirt.
4x Zoom -
8x Zoom -
dannyboy20
Registered User
NEWCASTLE (Home)
Kit Design - DO NOT change the strip from default, just go straight to the sponsor edit area.
Sponsor editor - Here i used 3 text layers and 1 logo layer.
The first text layer was "northern". 2nd font down. blue colour
The 2nd text layer was "rock". 2nd font down. blue colour.
The 3rd text layer was "northern". 2nd font down. white colour. This is so you can have a slight 3D look on the northern part of the sponsor.
The logo layer was used for the adidas logo.
Adidas Logo - This was based on Whistles design so the thanks go to him.
Final Home Shirt -
Kit Design - DO NOT change the strip from default, just go straight to the sponsor edit area.
Sponsor editor - Here i used 3 text layers and 1 logo layer.
The first text layer was "northern". 2nd font down. blue colour
The 2nd text layer was "rock". 2nd font down. blue colour.
The 3rd text layer was "northern". 2nd font down. white colour. This is so you can have a slight 3D look on the northern part of the sponsor.
The logo layer was used for the adidas logo.
Adidas Logo - This was based on Whistles design so the thanks go to him.
Final Home Shirt -
dannyboy20
Registered User
NEWCASTLE BADGE
The badge will be too big on the shirt once this is done, resize it in layer mode.
Also the background is pink as I changed the window colour so I could see the greys and whites.
Thumbnail size:
4x Zoom -
8x Zoom -
The badge will be too big on the shirt once this is done, resize it in layer mode.
Also the background is pink as I changed the window colour so I could see the greys and whites.
Thumbnail size:
4x Zoom -
8x Zoom -