For the best lawn care in cedar park, please visit our sponsor at lawn service cedar park They are a local lawn care and landscaping company that provide services in such as lawn care, lawn mowing, weeding, and landscape maintenance in Cedar Park, Austin, Round Rock, and Leander area. They are located at:

Lawn Care Service of Cedar Park 100 E Whitestone Blvd Ste 148, #166 Cedar Park, TX 78613 (512) 595-0884

Problems using Wedoit 3.0

S

STC

Registered User
Hey all!

i cant get to play a match using the wedoit 3.0 patch... it works fine untill the point where it loads up the match... then it just freezes... the music keeps going but nothing happens..

i tested it using wedoit patch 1.0, and the dynamo on it.. it worked like a charm, but i wanted to try wedoit 3.0....

i patched WE6FE_wedoit3 onto the original clean image.. applied the ita2eng patch, and burned it at the slowest speed possible... Did i do something wrong?? has anyone else had this prob?? and how do i solve it??

ill apriciate any help i can get!

Thanks in advance!

STC
 
Zygalski

Zygalski

Administrator
Are you using the second version of the ita2eng patch?
If not, get it.

I had a problem with the first one I burnt with wedoit 3.
It froze in the intro menu screen.
I tried it again and it worked fine.
 
S

STC

Registered User
ok, ill try that... i used the first ita2eng patch that came with wedoit 3.0, so i guess thats my prob...

thanks!

STC
 
S

STC

Registered User
hmmm... its still not working :(

I did as you said zygalski.. i d/l the ita2eng- fix patch and applied both the new wedoit 3.0 patch and the new ita2eng fix... it still freezes at the exact same spot it did before... just as it loads up the match screen..

any advice??

can i apply 2 wedoit patches at once? cause if so, i thought about patching wedoit 3, and then wedoit 1, to fix the translation that way... cause i think the translation is my problem... is there any other translation-patches out there??

Thanks in advance!

STC
 
Zygalski

Zygalski

Administrator
Don't think so.
I don't think usint two wedoits will work.
Maybe Mike or Tim can help out here.

If you can spare the disk, maybe try the wedoit3 on its own to see if that works. If not, maybe your file is bad and you need to
get another version.

Maybe also check the basics like make sure nothing else is running while you burn.
 
T

timedwins7

Registered User
Firstly, why do you want WEdoIT 3.0??? Its rubbish, get dynamo.

If you still insist on getting it, what i did was

1. clean img of we6fe
2. patch with we doit3.0
3. patch with ita2eng patch
4. patch half time fix
5. burn with nero at 2x

Sound advice from zygalski about checking that your file isn't corrupt.
 
Zygalski

Zygalski

Administrator
Tim, I thought that 4 was an improved/updated version of 3?
So you would only need 4?
I only used 4 anyway and it worked fine.

Plus wedoit 3 ain't that bad.
Ad boards are much better.
As is the music. And the badges are nicer.
Only bad point is the chants and some team rosters.
 
Last edited:
T

timedwins7

Registered User
4 what? there is no wedoit4?

wedoit3.0 - you like the music??? omg...... the adboards are good, which is why i have put them on my dynamo.

its just personal opinion as to what patch people have isnt it!
 
S

STC

Registered User
ok so i went ahead and took ur advice... i patched wedoit 3.0... by itself, without any ita2eng-patch onto a clean image... and the same thing happend... :(

at least now, i know that its my wedoit 3.0 thats the prob... i dont get it though, cause yesterday when i first ran into the problem, i downloaded the ita2eng fix, which included a new wedoit 3.0... the one i just tried...

i guess ill just redownload and start over :(

Thanks for all ur help guys

STC
 
Last edited:
Zygalski

Zygalski

Administrator
Tim, I meant step 4 in your list.
("4. patch half time fix")

And the music in wedoit3 is a lot better than Dynamo which just goes quiet after a while.

STC, good luck with the next version.
 
S

STC

Registered User
Thanks! looks like ill need it ::(

whats a sure sign of using the dynamo patch?? i applied it a few days ago along with wedoit 1, just to see if i could get anything to work at all.. :) it worked fine, but come to think of it didnt see any of the things that ive heard dynamo would do...

what is the right way to do it if i wanted to use the dynamo patch?

sorry for all these n00b question guys... im workin on it :)

Thanks in advance!

STC
 
Last edited:
Zygalski

Zygalski

Administrator
I used Mike's site here and it was very helpful and simple to understand.

You should be able to tell which Patch you have used by the menu screens and music. Dynamo plays a lot of Queen throughout. Menus can be seen at the site I think.
It has a Milan main menu pic.
 
S

STC

Registered User
ok, trying it now!

Do i need to apply wedoit 1 along with dynamo? for translation-reasons right?? or will i be ok using only the dynamo?

Thanks!

STC
 
Zygalski

Zygalski

Administrator
I did it like that.
Wedoit 1.0
then Solidus 4
then Dynamo.

Although the Solidus fix should be in there somewhere.
Not sure what it does though. Any ideas anyone?
 
mikeom1

mikeom1

Registered User
Yep you apply all ppf then any afp patches. That order is fine, the fix would just be applied after solidus 4 but you must regenerate and reload afsexplorer.
 
You must log in or register to reply here.
Top