J
jag87
Guest
You will need the following tools and software:
DVD Decrypter: http://fileforum.betanews.com/download/1011845169/1
PPF O Matic: http://www.paradogs.com/download/pdx-pom3.zip
1) Firstly insert your WE8 DVD into your DVD-ROM drive & load up DVD Decrypter.
2) From the source dropdown, select your correct DVD-ROM Drive.
3) Next, click on MODE > ISO > READ. This is so that the program can read and then rip your WE8 into an .ISO format on your hard drive.
4) Then click on the DVD to Hard disk icon. This should then create an .ISO file.
Patching using PPF O Matic:
WE8 patching has begun but is at a preliminary stage with only translations and boot packs released.
5) Open up PPF O Matic and then select the location of your WE8 ISO
6) Locate the .PPF format patch you wish to apply and then click apply!
*Depending up on the size of the patch you apply, a message will appear shortly after you press the apply button telling you to burn!
8) Re-Open DVD Decrypter
9) Next, click on MODE > ISO > WRITE. This is so that the program can read and write your WE8 into a bootable DVD Image to play using a Modchip or via Swap Method
10) Click on the little folder ICON and locate your patched WE8 DVD Image
11) Insert a blank DVD-R and burn!
DVD Decrypter: http://fileforum.betanews.com/download/1011845169/1
PPF O Matic: http://www.paradogs.com/download/pdx-pom3.zip
1) Firstly insert your WE8 DVD into your DVD-ROM drive & load up DVD Decrypter.
2) From the source dropdown, select your correct DVD-ROM Drive.
3) Next, click on MODE > ISO > READ. This is so that the program can read and then rip your WE8 into an .ISO format on your hard drive.
4) Then click on the DVD to Hard disk icon. This should then create an .ISO file.

Patching using PPF O Matic:
WE8 patching has begun but is at a preliminary stage with only translations and boot packs released.
5) Open up PPF O Matic and then select the location of your WE8 ISO
6) Locate the .PPF format patch you wish to apply and then click apply!
*Depending up on the size of the patch you apply, a message will appear shortly after you press the apply button telling you to burn!
8) Re-Open DVD Decrypter
9) Next, click on MODE > ISO > WRITE. This is so that the program can read and write your WE8 into a bootable DVD Image to play using a Modchip or via Swap Method
10) Click on the little folder ICON and locate your patched WE8 DVD Image
11) Insert a blank DVD-R and burn!