Lawn Care Service of Cedar Park 100 E Whitestone Blvd Ste 148, #166 Cedar Park, TX 78613 (512) 595-0884
sorry what teams you need?Hello ,
Why no one willing to help ???
The game already release long time ago, I do understand that on the beginning people was so busy with creating files/kits and more.
I'm willing to pay , for the hard work , I need help with kits, i've already created the full league , Full community waiting for the release , and I would be so appreciated if people can help out. Sorry what teams you need
Once again I'm willing to pay for the hard work.
Thanks Eyal
I looked and reset all my other Euro teams. I think the problem you're having is, many people used Cristiano's Bundesliga...including myself. I believe those teams were base teams used in Cristano's OF.
However it's not too difficult to base copy a downloaded team over...to suit your setup.
Here is my method to prevent any errors:
1. Find a team you want to import and import it onto the default team it was base copied over, make sure box 2 is checked, and you can check box 1 if you want to see which team before you proceed. (Don't save OF after)
2. Find the "proper" representations of real players, if any, are on the team. You can do this by going to edit player, and using the Triangle button on PS4 or Y on Xbox, and resetting each individual to see if they were edited. You should do this also to the team you plan to base copy on to also, if it's currently default you needn't worry about it. (Don't save OF after)
3. Go to data management and choose Load, and because you didn't save anything in steps 1 and 2, this will reset your OF to the way it was before you did steps 1 and 2, but now you know which players are "proper" representations and need to be transferred instead of base copied, or else you get duplicates.
4. Repeat Step 1.
5. Make sure the team you would like to base copy to, has the same amount of players, as the team you want to base copy from, this does not include the "proper" representations of players. Example being, If a team has 26 players and 4 are "proper" make sure the destination team has 22 players. If no "proper" ones, then you need 26 on the destination team. (Don't save OF after)
6. Base copy players 1 by 1 from the team you imported, to the desired destination team, remember this does not apply to the "proper" ones. (Don't save OF after)
7. Now that the players are base copied, transfer, if any the "proper" ones to the desired destination team. (Don't save OF after)
8. This time import the same team again, but IMPORTANT boxes 1 and 3 MUST be checked, and box 2 must NOT be checked.
***If you check box 2, this will apply player and squad data and bring all the players from the original export to your destination team, leaving the original imported team with 16 players, and send all the destination team players into the free agent pool.***
When prompted, choose the destination team that you just base copied all the players to. (Don't save OF after)
9. Now, go to data management and choose export team, and export the destination team that is now a full base copy of the original import. (Don't save OF after)
10. It's important that you didn't save the OF at any time before this, because now, you once again go to data management and select Load. This will put your OF back into the state before any of this, the state it was in before you even began, before step 1. (Don't save OF after)
11. Now you have your new base copied export, based on the team of your choosing, and you can now import that file, and the original conflict with the original import file is eliminated, and that file no longer needed. (Don't save OF after)
12. Finally go to edit players, and team, and double check to make sure that everything is the way it should be. If it is satisfactory and everything is as you expected, NOW save. And you have a TED file that is compatible with your setup.
Sounds more complicated than it actually is, and like a lot of work. Though I admit it's a little tedious, it takes about 10-15 minutes per team, which includes making sure there's no discrepancies.
I don't know how anyone else does it, but this is my method and it's pretty full proof, and guarantees no conflicts arise, but the directions must be followed carefully and in the correct order.
Hope it can be of some help to whoever needs it. I've had to do it countless times, for entire leagues/continents to make my preference for teams/countries all fit together compatibly when they come from many different sources...while also eliminating chances for duplicates and other errors. Cheers!
someone asked for a face build for player Artem Milewskiy,an ukrainian player who plays for Dinamo Best,formerley a national player for team Ukraine.
stats are from PES-Master from PES 2013.
the facebuild is from a picture i´ve seen on Dinamo Brest Website,hes has short hair now,i remember that he formerley had long hair.
i´ve made him and put him to Donezk squad.
i´ve forgotten who made this squad in original,could be Konami,but i don´t know.
http://www.mediafire.com/file/6a4yb4x29556b6a/DONEZK.ted
If someone find two teams from Greece Super League (like Panionios, Atromitos, Asteras Tripolis) you can send it here.
Or stats only that's fine (but not made with the Fm Pes converter with lagun-2 editor), i need this for my project... Exports from pc or whatever.
Even if i will remade all the stats for teams created later, but for now on i'm restructuring everything
Thanks in advance
Is anybody making more European national teams for PES 18 /PS4? Or do u know if they have been made already?
hi someone please can test this in your pes18 (better if you do in other account with no option file) PS4
test 1
http://www.mediafire.com/file/x1gaf23kaowlytk/Zimbabue+pes17to18+hd17.ted
test 2
http://www.mediafire.com/file/h7asg019akwtxht/Zimbabue+pes17to18+hd18.ted
this a convertion from pes17 to pes 18 of zimbawe
(i can do easy from pes18 to pes17, now i try to pes 17 to 18)
here have the kits if you want (made by me ggdaris for all national team of the wolrd OF for pes17 ps4)
http://imgur.com/gallery/amk08
I have done all the teams from the greek super league by myself if you want (by the way it took me 2 months to finish this project because i have done all the player faces, stats, special abilities etc. by myself, so i can guarantee for the quality of the teams).
There is only little problem. I don't know know how to upload it here :blush:
If you want you can send me a PM with your email account and i will send the exports there.
Hi.
I tested your file.
I downloaded test 1 and kits, because test 2 was offline link.
Here what I got:
The team imported without errors (in the import/export screen).
But in-game, Zimbabwe had just one player and one goalkeeper (2 player in general).
Both the line player and the goalkeeper were the same player (O. DONOVAN to be exact).
The other players' slot in the team were occuppied by others "O. DONOVAN"(clones), but they were there just to fill the space because they are invisible or non existent at all. You just see "O. DONOVAN" goalkeeper (with the proper kit) and one line player "O . DONOVAN" in-game.
If you press button to start the match, the match just loads and goes to end game (I think it's because of the lack of the players, one goalkeeper and one line player does not consist a valid team).
The GK, HOME and AWAY kits appear to work correctly.
Zimbabwe has no emblem but I think it's because I was unable to find it to download along with the kit images.
I know my english is atrocious, so don't shout at me.
I'll try to upload some pics in my next testing.
It's good to know someone is trying to convert the amazing "all national teams 2017" to PES 2018. I've been waiting for this .
Unfortunately it don't worked well in this first attempt.
IF you need more testing feel free to ask.
Just trying to help!
That should be really helpfull thanks! But with all that work you could open a thread for Greek Superleague
When you do good work, it's better to share it and be proud of
To send it here
-you can create a Mediafire account (it's free and simple) and share the link
-or you can create a google doc/folder (but i don't know how it works)
I've got pratically every teams i need on Europe, missing only 2 greek teams and 2 Ukraine teams
Hey
[MENTION=227392]ggdaris[/MENTION] already made a tutorial on how to convert the team exports.
Link here: http://www.pesgaming.com/showthread.php?t=103191
That problem you had with the "clones": try to go to Edit menu and reset game plan.
Here is Panionios.
The kits are from YellowWolf04 (editing team of wehellas.gr) and have been imported in the L size(2048x2048).
http://www.mediafire.com/folder/f1flfnmanfab6/Panionios
Thanks a lot mate!
I will test it when i'm done with the teams i'm currently working on.
But could you share to me teams when the Winter transfers are closed, and you've made some transfers?
I only need Atromitos and Panionios. For kits, that's not important that they are in 2048x2048 size.
Also, if you want to made things easier for you, you could also made a .rar or .zip archive with the teams created and then upload them on mediafire