jonneymendoza
Registered User
ummm u sudnt hear a grinding sound when u open up the trey.. cuz if u do then that usualy means that the disk is still reading
Lawn Care Service of Cedar Park 100 E Whitestone Blvd Ste 148, #166 Cedar Park, TX 78613 (512) 595-0884
Nuggy said:Burnt a new disc with the new patch but still can't get my slide tool/swap magic disc to work, once I swap the discs over and press cross I just hear the disc grinding trying to load then it stops and get the red/blue striped background. Any suggestions?
Swipe Card Info
The only modification is the front tray cover has to be taken off. On the bottom of the tray (when ejected) remove the little screw and with a quick tug (holding the faceplate on both sides) the cover will pop off. If the little clip(s) break it is okay you can alway glue it back on if needed. I cannot attach the movie files but have the links for them here (right click and save as to download to your PC)
http://homepage.ntlworld.com/checkmate/Swap magic movie.wma
http://cliche.parameter.dk/click/6573d7da05682eeee6badf6a300b4d8d
http://cliche.parameter.dk/click/14840328ba87a8e4856d47a85e89e3c1
Cellini said:Just the man!
"securing the rod in the gap where you found it."
It doesn't seem comfortable there - It sinks about an inch down a hole, so the other end is right over the screw, how far out should it stick out?
It came out completely and I don't want to force it back, but I can't see where or how it's 'secured' to anything, other then sliding it back down the hole underneath.
edited to add...
You've got to check out this guy and his movie!
http://forums.afterdawn.com/thread_view.cfm/34743
Is the screw supposed to clamp the rod down, holding it in place, so that the tray goes back in when the rod is tugged in buy a motor inside?
So I shouldn't have put the screw back in underneath the rod, leaving it loose?
It's dawing on me very slowly, I know![]()
edired to add: ...but it works now! The rod should be held in place by the screw.
Thank you, Slide King!![]()
Now I've got to learn how to eject using the slide card, and get the game back in again.
jag87 said:Cellini - Always my captian on Pro Evolution!